FUEL INJECTION SYSTEM
9-52
Fault code No. 43
Fault code No.
43
Item
Fuel system voltage: incorrect voltage supplied to the fuel injector
and fuel pump.
Fail-safe system
Able to start engine
Able to drive vehicle
Diagnostic code No.
09, 50
09
Indicated
Fuel system voltage (battery voltage)
Approximately 12.0
Procedure
Turn the main switch to “
” (on), and then compare the actually mea-
sured battery voltage with the display value. (If the actually measured
battery voltage is low, recharge the battery.)
50
Actuation
Actuates the fuel injection system relay five times at one-second inter-
vals.
The “CHECK” indicator and “
” on the Yamaha diagnostic tool screen
come on each time the relay is actuated.
(When the relay is on, the “CHECK” indicator and “
” on the Yamaha di-
agnostic tool screen go off. When the relay is off, the “CHECK” indicator
and “
” on the Yamaha diagnostic tool screen come on.)
Procedure
Check that the fuel injection system relay is actuated five times by listen-
ing for the operating sound.
Item
Probable cause of malfunc-
tion and check
Maintenance job
Confirmation of service com-
pletion
1
Connection of fuel injection sys-
tem relay coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
Improperly connected
→
Con-
nect the coupler securely or re-
place the wire harness.
Start the engine and let it idle
for approximately 5 seconds.
Fault code number is not dis-
played
→
Service is finished.
Fault code number is displayed
→
Go to item 2.
2
Connection of ECU coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
Improperly connected
→
Con-
nect the coupler securely or re-
place the wire harness.
Start the engine and let it idle
for approximately 5 seconds.
Fault code number is not dis-
played
→
Service is finished.
Fault code number is displayed
→
Go to item 3.
Summary of Contents for 2016 Grizzly yf700gg
