Yamaha 2008 Raptor 250, Service Manual

Page: 54 / 311

SPEC
2-31
Make sure that the end of the clip is facing down-
ward.
Set the rear brake reservoir hose with the position-
ing yellow paint mark pointing down.
Install the rear brake hose in the direction shown in
the illustration.
Insert the rear brake hose until it contacts the pro-
jection.
Make sure that the end of the clip is facing out-
ward. Install the rear brake reservoir hose, making sure
to face the white paint mark outward.
Insert the rear brake reservoir hose until it contacts
the projection.
When installing the rear brake hose, make sure
that the metal part on the rear brake Inlet hose is
touching the stopper of the rear caliper.
E
E
D-D C-C
D
D
C
C
CABLE ROUTING