Yamaha 2008 Raptor 250, Service Manual

Page: 176 / 311

ENG
4-60
PICKUP COIL ROTOR AND STARTER CLUTCH
Order Job/Parts to remove Q’ty Remarks
Removing the pickup coil rotor and
starter clutch Remove the parts in the order listed.
Engine oil Drain.
Shift pedal Refer to “SHIFT SHAFT”.
Drive sprocket cover Refer to “REAR SHOCK ABSORBER,
SWINGARM AND DRIVE CHAIN” in
chapter 6.
1 Starter idle gear cover/O-ring 1/1
2 Starter idler gear 1/shaft 1/1
3 Pickup coil rotor lead coupler 2 Disconnect.
4 Left crankcase cover 1
5 Dowel pin 2
6 Crank case cover gasket 1
7 Stator coil assembly/pickup coil 1/1
8 Starter idler gear 2/shaft 1/1
9 Pickup coil rotor 1
10 Woodruff key 1
11 Starter wheel gear 1
30 Nm (3.0 m•kg, 22 ft•lb)
10 Nm (1.0 m•kg, 7.4 ft•lb)
10 Nm (1.0 m•kg, 7.4 ft•lb)
60 Nm (6.0 m•kg, 44 ft•lb)
10 Nm (1.0 m•kg, 7.4 ft•lb)
7 Nm (0.7 m•kg, 5.2 ft•lb)
PICKUP COIL ROTOR AND STARTER CLUTCH