Yamaha 2008 Raptor 250, Service Manual

Page: 51 / 311

SPEC
2-28
To the front panel
To the front fender
To the handlebar
To the right headlight
Make sure to route the oil cooler hoses 1and 2
through the guide wire.
Install the front brake hose 2, making sure to face
the white paint mark forward.
Route the oil cooler hose 1 and 2 between the
exhaust pipe and the engine bracket. Route the battery negative lead behind the clutch
cable holder.
Route the air vent hose through the bracket.
Make sure that the white paint mark on the air filter
case breather hose
Make sure that the clip end is facing the left side of
the vehicle.
Route the throttle cable under the cross pipe and
left of the steering column as shown in the illustra-
tion.
CABLE ROUTING
H
H
H-H
F
A-A
F
A A