Yamaha 2008 Raptor 250, Service Manual

Page: 272 / 311

ELEC
7-5
EBS01030
CHECKING THE BULBS AND
BULB SOCKETS
Check each bulb and bulb socket for damage
or wear, proper connections, and also for conti-
nuity between the terminals.
Damage/wear
→
Repair or replace the
bulb, bulb socket or both.
Improperly connected
→
Properly connect.
No continuity
→
Repair or replace the bulb,
bulb socket or both.
TYPES OF BULBS
The bulbs used on this machine are shown in
the illustration on the left.
• Bulb is used for the headlight and can
be pulled out by turning counterclockwise
while pushing the bulb holder and remov-
ing.
After this, you can remove the bulb.
• Bulb is used for tail/ brake lights and can
be removed from the socket by pushing and
turning the bulb counterclockwise.
• Bulb is used for indicator lights and can
be removed from their respective socket by
carefully pulling them out.
CHECKING THE CONDITION OF THE
BULBS
The following procedure applies to all of the
bulbs.
1. Remove:
• bulb
CHECKING THE BULBS AND BULB SOCKETS