49
3 Setting the VOX (Voice Operated Transmit) Function
Set the VOX function ON/OFF, and VOX delay time.
1. Press and hold the [
F(SETUP)
] key
[
TX/RX
]
[
3 AUDIO
]
[
3 VOX
]
For details, refer to the Operating Manual.
4 Setting the Voice Recording Function
Set the voice recording function.
1. Press and hold the [
F(SETUP)
] key
[
TX/RX
]
[
3 AUDIO
]
[
4 RECORDING
]
For details, refer to the Operating Manual.
Setup Menu: MEMORY
1 Memory list settings
Set the memory list to be displayed by rotating the
DIAL
knob, confirming the contents
of the memory, and then recalling the memory channel.
1. Press and hold the [
F(SETUP)
] key
[
MEMORY
]
[
1 MEMORY LIST
]
For details, refer to the Operating Manual.
Setup Menu: SIGNALING
1 Setting the DTMF code transmission method
Set method (Auto or Manual) to transmit the registered DTMF code.
1. Press and hold the [
F(SETUP)
] key
[
SIGNALING
]
[
1 AUTO DIALER
]
For details, see “Transmitting the Registered DTMF Code” (page 16).
2 Calling only the specific stations
The new pager code permits calls to specific stations only.
1. Press and hold the [
F(SETUP)
] key
[
SIGNALING
]
[
2 PAGER CODE
]
For details, see “Setting the Code for Your Station” (page 12).
3 Enabling No-communication Squelch Function (PR Frequency Function)
Set a no-communication squelch CTCSS tone from 300 Hz to 3000 Hz in 100 Hz steps.
1. Press and hold the [
F(SETUP)
] key
[
SIGNALING
]
[
3 PR FREQUENCY
]
2. Rotate the
DIAL
knob to select the desired CTCSS tone frequency.
300Hz to 3000Hz (100Hz steps)
4 Notification of calls from other stations
The beep may be set to sound an alert when a call is received from a other station.
1. Press and hold the [
F(SETUP)
] key
[
SIGNALING
]
[
4 BELL RINGER
]
For details, see “Notification of a Call from a Remote Station by the Bell Function”
