56
WP FILTER
Sets the type of beacon to be output when “WAYPOINT” is selected in “OUTPUT”.
1. Rotate the
DIAL
knob to select [
WP FILTER
] then press the
DIAL
knob.
2. Rotate the
DIAL
to select the beacon type you want to output, then press the
DIAL
knob.
ALL
Outputs all the received beacons.
MOBILE
Outputs only mobile station beacons.
FREQUENCY
Outputs only the beacons of stations with frequency infor-
mation.
OBJECT/ITEM
Outputs only the beacons of object stations or item stations.
DIGIPEATER
Outputs only the beacons of digital repeater stations.
VoIP
Outputs only beacons of VoIP stations such as WIRES.
WEATHER
Outputs only beacons of the weather stations.
YAESU
Outputs only beacons of stations using Yaesu transceivers.
CALL RINGER
Outputs only the information of call sign ringer stations which
are set from [8 APRS RINGER (CS)] in the APRS Setup menu.
RANGE RINGER Outputs only the information of stations recognized as an
approaching station by the [7 APRS RINGER] range ringer
function in the APRS Setup menu.
The default setting: ALL
Sets the APRS and data communication operating band
Set the operating band of the APRS (internal modem) and data communication (when
using the DATA jack at the back of the main body).
1. Press and hold the [
F(SETUP)
] key
[
DATA
]
[
2 DATA BAND SELECT
]
APRS
Sets the APRS operating band
1. Rotate the
DIAL
knob to select [
APRS
] then press the
DIAL
knob.
2. Rotate the
DIAL
to select the APRS operating band, then press the
DIAL
knob.
MAIN BAND
The main band will be selected.
SUB BAND
The sub-band will be selected.
A-BAND FIX The upper band will be selected.
B-BAND FIX The lower band will be selected.
A=TX / B=RX Transmits using the upper band and receives using the lower
band.
A=RX / B=TX Receives using the upper band and transmits using the lower
band.
The default setting: B-BAND FIX
