Yaesu FTM-300DR, Advance Manual

Page: 23 / 65

23
Functions used as needed
Timer / Clock function
1. Press and hold [ F(SETUP) ] key

[ DISPLAY ]

[ 6 DISPLAY MODE ]
2. Rotate the
DIAL
knob to select [
TIMER/CLOCK
] then press the
DIAL
knob.
The Clock screen will be displayed.
3. The following functions can be selected each time the DIAL knob is pressed after
pressing the [ F (SETUP) ] key.
Clock screen / Lap timer screen / Countdown timer screen
4. Press the [ BACK ] key twice, return to the normal operation display.
Using the lap timer
1. Press the [ F(SETUP) ] key.
2. Rotate the
DIAL
knob to select [
MODE
] then press
the
DIAL
knob several times to display the lap timer
screen.
z
Start measurement
1. Rotate the DIAL knob to select [ START ] then press the
DIAL knob.
The timer will start.
z
Measure lap time
1. Rotate the DIAL knob during measurement and select
[ LAP ].
2. Each time press the DIAL knob, the lap time is stored.
Up to 99 lap times can be saved in the memory.
z
Call lap time
1. Rotate the DIAL knob to select [ RECALL ] then press the DIAL knob.
The lap time and split time are displayed.
2. When there are multiple lap times, rotate the DIAL knob to select [
p
] or [
q
] then
press the DIAL knob to switch between the lap times.
z
Stop measurement
1. Rotate the
DIAL
knob to select [
STOP
] then press the
DIAL
knob.
The timer will stop.
z
Clear the measurement result
1. When measurement is stopped, turn the DIAL knob to select [ RESET ] then press
the DIAL knob.
All measurement results will be erased.