51
Setup Menu: CONFIG
1 Setting Clock Time
Set the date and time of the
FTM-300DR/DE
clock. In the factory default, the date and
time are automatically set when acquiring the GPS signals, so in this case no manual
setting is necessary.
1. Press and hold the [
F(SETUP)
] key
[
CONFIG
]
[
1 DATE&TIME ADJUST
]
2. Press the
DIAL
knob to change the year
month
day
hour
minute.
3. Rotate the
DIAL
knob to change the setting.
4. When “minute” is set and the
DIAL
knob is pressed, the time becomes “00” and the
date and time settings are confirmed.
Please note that the setting values will not be saved if you exit the setup menu
during setting.
2 Setting the display format for the date and time
1. Press and hold the [
F(SETUP)
] key
[
CONFIG
]
[
2 DATE&TIME FORMAT
]
2. Rotate the
DIAL
knob to select [DATE] or [TIME].
3. Press the
DIAL
knob to change the setting.
DATA
yyyy/mmm/dd, dd/mmm/yyyy
,
yyyy/dd/mmm
,
mmm/dd/yyyy
TIME
24 hour / 12 hour
yyyy (Year), mmm (Month), dd (Day)
The default setting: mmm/dd/yyyy
The default setting: 24 hour
3 Setting the time zone
The FTM-300DR/DE clock time can be synchronized for your time zone with the time
data (Coordinated Universal Time) from the GPS.
1. Press and hold the [
F(SETUP)
] key
[
CONFIG
]
[
3 TIME ZONE
]
2. Rotate the
DIAL
knob to select the desired setting.
The time zone can be set at 0.5 hour intervals up to ±14 hours.
The default setting: UTC ±0:00
4 Setting the auto repeater shift
1. Press and hold the [
F(SETUP)
] key
[
CONFIG
]
[
4 RPT ARS
]
2. Press the
DIAL
knob to select the desired setting.
ON
The auto repeater shift function will be switched ON.
OFF
The auto repeater shift function will be switched OFF.
The default setting: OFF
