28
Voice announcement of the operating frequency
Setting the announce function operation
Set the following voice announcement parameters:
• Automatically announce the frequency or not
• Announce out the frequency in English or Japanese
• Voice announcement audio level
• Mute the receive audio during a voice announcement.
1. Press and hold the [
F(SETUP)
] key
[
OPTION
]
[
3 VOICE MEMORY
]
2. Rotate the
DIAL
knob to select [
ANNOUNCE
].
3. Press the
DIAL
knob to select the condition for reading out of the frequency.
The setting will switch between “AUTO”, “OFF” and “MANUAL” each time the
DIAL
knob is pressed.
OFF:
The frequency is not announced.
AUTO:
The frequency is announced when changing bands, switching between
VFO mode and Memory mode, or announced the [
F(SETUP)
] key
[
FVS-2
]
[
VOICE GUIDE
].
MANUAL: announced [
F(SETUP)
] key
[
FVS-2
]
[
VOICE GUIDE
].
Factory default value: AUTO
4. Rotate the
DIAL
knob to select [
LANGUAGE
].
5. Press the
DIAL
knob to select the language in which the frequency is announced.
The setting will switch between “ENGLISH” and “JAPANESE” each time the
DIAL
knob is pressed.
Factory default value: ENGLISH
6. Rotate the
DIAL
knob to select [
VOLUME
].
7. Press the
DIAL
knob to select the announcement volume.
The setting will switch between “HIGH”, “MID” and “LOW” each time the
DIAL
knob
is pressed.
Factory default value: HIGH
8. Rotate the
DIAL
knob to select [
RX MUTE
].
9. Press the
DIAL
knob to select ON/OFF.
The setting will switch between “ON” and “OFF” each time it is pressed.
ON: The receive audio will be muted during a voice announcement or replaying re-
corded audio.
OFF: The receive audio will not be muted during a voice announcement or replaying
recorded audio.
Factory default value: ON
