53
10 Set the microphone programable keys
Functions can be assigned to the program keys (P2 to P4) on the provided microphone
(SSM-85D).
1. Press and hold the [
F(SETUP)
] key
[
CONFIG
]
[
10 MIC PROGRAM KEY
]
For details, refer to the Operating Manual.
11 Expanding the receive range
Setting the receive frequency range.
1. Press and hold the [
F(SETUP)
] key
[
CONFIG
]
[
11 RX COVERAGE
]
2. Press the
DIAL
knob to select the desired setting.
WIDE
Receives the air band and the information wireless band.
NORMAL
Receives only the 144 MHz and the 430 MHz bands.
The default setting: WIDE
12 Setting the unit display
Set the units of measure to display the altitude, distance, and speed.
1. Press and hold the [
F(SETUP)
] key
[
CONFIG
]
[
12 UNIT
]
2. Press the
DIAL
knob to select the desired setting.
INCH
Display units in the Imperial/USA system.
METRIC
Display units in the Metric system.
The default setting: Depends on the transceiver version
13 Automatic Power OFF
The transceiver can be set to automatically power OFF when there is no operation for a
period.
1. Press and hold the [
F(SETUP)
] key
[
CONFIG
]
[
13 APO
]
2. Rotate the
DIAL
knob to select the desired setting.
OFF
Does not turn the power OFF automatically.
0.5 hour to 12 hour Turns the power OFF when no operation is performed for a
specified time.
The default setting: OFF
14 Limit the time of a continuous transmission (TOT Function)
The transceiver will automatically return to receive after transmitting continuously for a
specified time.
1. Press and hold the [
F(SETUP)
] key
[
CONFIG
]
[
14 TOT
]
2. Rotate the
DIAL
knob to select the desired setting.
The time will change in the following sequence.
OFF / 1 min / 2 min / 3 min / 5 min / 10 min / 15 min / 20 min / 30 min
When the time-out-timer is active, a beep is sounded when a continuous transmission nears
the set time. About 10 seconds later, the transceiver returns to the receive mode.
