12
New Two-Tone CTCSS Pager Function
When using
FTM-300DR/DE
transceivers with a group of friends, setting the Two-Tone
CTCSS personal codes allows calling just the specific stations. Even when the person
who is called is not near the transceiver, the information on the LCD indicates that a call
was received.
The new two-tone CTCSS pager feature does not operate in digital mode. Press the [
D X
]
key to change from Digital to Analog FM or the AMS function.
Using the Pager Function
1. Press the [
F(SETUP)
] key
[
FUNCTION
]
[
SQ-TYP
]
2. Press the
DIAL
knob to select [
PAG
].
3. Press the [
DISP
] key or the
PTT
switch to save the setting and return to normal
operation.
Setting the Code for Your Station
Set the “pager code” to be called by other stations.
1. Activate the pager function (refer to “Using the pager function” above).
2. Press and hold the [
F(SETUP)
] key
[
SIGNALING
]
[
2 PAGER CODE
].
3. Rotate the
DIAL
knob to select [
RX CODE 1
] then
press the
DIAL
knob.
RX CODE 1
RX CODE 2
TX CODE 1
TX CODE 2
05
47
05
47
SIGNALING
2 PAGER CODE
4. Rotate the
DIAL
knob to select the
RX CODE 1
of the
code from 01 to 50.
5. Press the
DIAL
knob or the [
BACK
] key.
RX CODE 1
RX CODE 2
TX CODE 1
TX CODE 2
05
47
05
47
SIGNALING
2 PAGER CODE
6. Rotate the
DIAL
knob to select [
RX CODE 2
] then
press the
DIAL
knob.
7. Rotate the
DIAL
knob to select the
RX CODE 2
of the
code from 01 to 50.
The same code cannot be used for
RX CODE 1
and
RX CODE 2
.
RX CODE 1
RX CODE 2
TX CODE 1
TX CODE 2
05
47
05
47
SIGNALING
2 PAGER CODE
Next, set the pager code for directing a call to a specific partner station.
8. Rotate the
DIAL
knob to select [
TX CODE 1
] then
press the
DIAL
knob.
