P 4
da Vinci Super 3D printer
da Vinci Super
Unboxing and Installation
1
3
6
9
12
2
4
7
10
13
5
8
11
Remove the plastic wrap and PP strap.
Remove the top cover box and the
packaging materials.
Place the printer on a table or platform
(please do not move the printer alone).
Remove the cable tie and foam situated
behind the front door.
Plug-in the power cord
Remove the top cover.
Remove the side of the carton .
Remove all tape from the body (4
pieces in total).
Insert the guide tube through the
top cover, and then insert one end
into the extruder module.
power on the printer.
Remove the assessory box.
Remove the foam next to the guide
screws on both sides, and then remove
the foam under the print bed. (total 4
pieces)
Insert the other end of the guide
tube into the feed module and
secure it tightly.
