P 12
da Vinci Super 3D printer
da Vinci Super
Z-offset
Jog Mode
●
When the printing bed is calibrated, perform the vertical calibration of Z-OFFSET to ensure the print head can
eject onto the printing bed smoothly.
The jog mode is a function which allows you to control the position of the print head and the printing bed manually.
How to move the print head:
Return to the Home point. Always return to the Home point
prior to any movement in any direction.
Move in the X axle direction.
Move in the Y axle direction.
Move in the Z axle direction
Home position.
1.
It is recommended that the space between the print head and the print bed just touch and the nozzle can move
smoothly on the print bed.
2. Users can tap the icon to raise or lower the print bed, the higher the value, the bigger the distance and vice versa.
3. After the adjustment is completed, tap Check to save the settings.
1
2
3
4
1
2
3
4
