P 14
da Vinci Super 3D printer
da Vinci Super
Nozzle replacement.
1. Tap the Change Nozzle option.
3. Wait until the print head moves to a proper position
for change.
5. Turn off the power before change the print head.
7. Press the white release button to separate the
print head.
Installation sequence of new print head:
1. Connect the bus (make sure it clicks into place)
2. Press the white release button on the print head and assemble the print head and the mechanism. After the assembly,
check if the print head is secured without shaking.
3. Turn on and use the printer.
8. Hold the print head with one hand and remove the bus with
the other. The removal of the print head is complete.
2. Check if replacement is necessary. Tap Check to replace it.
4. The position of the print head change is shown as below.
6. Change the print head from above the machine.
In order to print a wide range of different materials, the
da Vinci super has a fan duct attached to its extruder
module. This can be opened and closed depending on
your filament type.
PLA & PETG : Close
ABS & TPE : Open
