Revision 1.1
WebSwitch™ Users Manual
Sensors (Model XRDI-WS3P only)
Object
Response
webswitch_sensorOne
Value: x.x (Decimal temperature or humidity)
webswitch_sensorTwo
Value: x.x (Decimal temperature or humidity)
webswitch_sensorThree
Value: x.x (Decimal temperature or humidity)
Outlet Reboots
Object
Response
webswitch_outletOne_reboot
Value: # (Number of reboot attempts)
webswitch_outletTwo_reboot
Value: # (Number of reboot attempts)
Read/Write Objects
Outlets
Object
Response
Set Value
webswitch_outletOne
Value: 0 or 1
0 - OFF, 1 - ON, 2 - PULSE
webswitch_outletTwo
Value: 0 or 1
0 - OFF, 1 - ON, 2 - PULSE
TRAPS
WebSwitch™ also has the capability to send information to the SNMP manager as a result of alarm
conditions through the use of TRAPS. The following TRAPS are supported:
Sensors (Model XRDI-WS3P only)
These traps occur as a result of the temperature or humidity sensor reaching the alarm condition. They
are configured on the
Sensors
Tab.
Object
Description
Value
webswitch.65
Sensor one alarm
xx.x
webswitch.66
Sensor two alarm
xx.x
webswitch.67
Sensor three alarm
xx.x
Outlets
These traps occur as a result of the outlets changing states. They are configured on the
Outlets
setup
tab.
Object
Description
Value
webswitch.75
Outlet one state change
0 or 1 (0 - OFF, 1 - ON)
webswitch.76
Outlet two state change
0 or 1 (0 - OFF, 1 - ON)
Xytronix Research & Design, Inc.
96
