Manual Ozone Generating System SMOevo
Error! Use the Home tab to apply Überschrift 1 to
the text that you want to appear here.
Rev. 1.0
Page 77 of 91
9.2 Personal Protective Equipment
In order to avoid injuries, wear the following protective equipment during maintenance and
repair work:
Ear protection
Safety gloves
9.3 Requirements for Maintenance Staff
Maintenance work on the ozone system may be carried out by qualified persons (
refer to
section Classification of Operating Staff
) only.
9.4 Requirements for Safe Maintenance
Read and observe the instructions in section Cleaning
prior to starting any maintenance or repair work.
Observe the product-related precautions when handling
oil, grease and other chemical substances!!
Prior to
maintenance work
Purge all lines to remove residual ozone.
Attach a clearly visible maintenance tag to the ozone system
informing about the duration of the maintenance work.
Ensure the complete ozone system is depressurized.
Make sure that the main switch is set to
0/Off.
Isolate the system from the power supply and disconnect the
power cable from the socket. Wait 30 minutes before starting
any work.
Secure the system against unintentional restart.
Secure all upstream and downstream devices and operating
media., e. g. feed gas supply, against unintentional activation.
