PAGE 15
Aquavar IPC Start-Up Genie
CentriPro
CHAPTER 7: DIGITAL INPUT
This setup allows configuration of the digital inputs.
• Terminal 19, 27, and 33 Digital Input: If not already set for Pump Protection or Dual Setpoint, select the
function from the available digital input range.
Option
Function
Option
Function
Select the function
of Terminal 42 as an
analog current output. A
motor current of 20 mA
corresponds to I
max*
[131]
Reference 4-20mA
Minimum Reference -
Maximum Reference
[0]
No operation
[132]
Feedback 4-20mA
–200% to +200% of 20-14
Maximum C14Reference/
Feedb.
[100]
Output Freq. 0-100
0 - 100 Hz, (0-20 mA)
[133]
Motor Current 4-20mA
0 - Inverter Max. Current
(16-37 Inv. Max. Current)
[101]
Reference Min-Max
Minimum Reference -
Maximum Reference,
(0-20 mA)
[134]
Torque 0-lim 4-20mA
0 - Torque Limit (4-16 Torque
Limit Motor Mode)
[102]
Fe/– 200%
–200% to +200% of 20-14
Maximum Reference/Feedb.,
(0-20 mA)
[135]
Torque 0-nom 4-20mA
0 - Motor rated torque
[103]
Motor Current 0-Imax
0 - Inverter Max. Current
(16-37 Inv. Max. Current),
(0-20 mA)
[136]
Power 4-20mA
0 - Motor rated power
[104]
Torque 0-Tlim
0 - Torque Limit (4-16 Torque
Limit Motor Mode), (0-20 mA)
[137]
Speed 4-20mA
0 - Speed High Limit
(4-13 and 4-14)
[105]
Torque 0-Tnom
0 - Motor rated torque,
(0-20 mA)
[139]
Bus ctrl.
0 - 100%, (0-20 mA)
[106]
Power 0-Pnom
0 - Motor rated power,
(0-20 mA)
[140]
Bus ctrl. 4-20mA
0 - 100%
[107]
Speed 0-HighLim
0 - Speed High Limit (4-13
Motor Speed High Limit [RPM]
and 4-14 Motor Speed High
Limit [Hz]), (0-20 mA)
[141]
Bus ctrl. t.o.
0 - 100%, (0-20 mA)
[113]
Ext. Closed Loop 1
0 - 100%, (0-20 mA)
[142]
Bus ctrl. t.o. 4-20mA
0 - 100%
[114]
Ext. Closed Loop 2
0 - 100%, (0-20 mA)
[143]
Ext. CL 1 4-20 mA
0 - 100%
[115]
Ext. Closed Loop 3
0 - 100%, (0-20 mA)
[144]
Ext. CL 2 4-20 mA
0 - 100%
[130]
Out frq 0-100 4-20mA
0 - 100 Hz
[145]
Ext. CL 3 4-20 mA
0 - 100%
