Xycom AHIP-370, Manual

Page: 51 / 65

Appendix C – Pinouts
51
Pin Signal Pin Signal
14A AUTOFEED 14B NC
15A PERROR 15B NC
16A INIT 16B NC
17A SELIN 17B NC
18A GND 18B NC
19A GND 19B NC
20A GND 20B DTR2
21A GND 21B NC
22A GND 22B RI2
23A GND 23B NC
24A GND 24B NC
25A GND 25B NC
Note
‘A’ denotes the lower connector (LPT1) and ‘B’ denotes the upper con-
nector (COM2, RS-232). This connector also contains the remote system
reset option. The reset jumper (J1) must be in position B for this option
to work. The PB_RESET* pin must be switched to GND to reset the en-
tire board.