Xycom AHIP-370, Manual

Page: 34 / 65

AHIP-370 Manual
34
Enable Memory Gap Allows creation at a 128K memory gap in conventional memory from 512K to 640K, or a
1MB memory gap in extended memory from 15 MB to 16 MB. Requires use of conven-
tional or extended memory. Default is [Disabled].
ECC Configuration Allows configuration of Error Checking and Correction Memory. Requires ECC mem-
ory. Default is [Disabled]
SERR Signal Conditions Allows configuration of conditions upon which the SERR signal is to be asserted for
ECC memory. Requires ECC memory. Default is [Multiple bit].
8-bit I/O Recovery
16-bit I/O Recovery
Number of ISA clock cycles inserted between back-to-back I/O operations.
On-board Socket Site Submenu
Xycom BIOS Setup Utility
Advanced
On-board Socket Site Item Specific Help
32-pin Socket Site Address [Disabled] If the item you
*32-pin Socket Site Type [SRAM] are viewing has
32-pin Socket Site I/O [180h-181h] specific help, it will
be listed here.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select » Submenu F10 Previous Values
Figure 3-7. On-board Socket Site submenu
Table 3-7. On-board Socket Site submenu options
Option Description
32-pin Socket Site Address Allows on-board 32-pin socket site to be disabled or mapped to a memory range.
Default is [Disabled].
1
32-pin Socket Site Type Indicates type of memory installed in on-board 32-pin socket site. Default is [SRAM].
32-pin Socket Site I/O Allows configuration of I/O address used by on-board 32-pin socket site. Default
is [180h-181h].
1 = Visible only when Socket Site Address is “Enabled”