Xycom AHIP-370, Manual

Page: 28 / 65

AHIP-370 Manual
28
BIOS Main Setup Menu
You start the BIOS Setup utility as your system boots up. To access the
main menu, press
F2
after the memory tests and before your system
loads the operating system. If the Boot Time Diagnostic Screen (in the
Advanced Menu) is enabled on your system, the BIOS will display the
following message: “
Press F2 to enter Setup.
”
Xycom BIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
System Time: [16:19:20]
System Date: [10/27/98]
Diskette A: [1.44 MB, 3½” ] If the line item you
Diskette B: [Disabled] are viewing has
specific help, it will
?
IDE Primary Master: (1082 MB) be listed here.
?
IDE Primary Slave: (CD-ROM)
?
IDE Secondary Master: [None]
?
IDE Secondary Slave: [None]
System Memory: 640 KB
Extended Memory: 31744 KB
?
Cache RAM [512 KB]
*
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select » Submenu F10 Save and Exit
Figure 3-1. Main Setup Menu
Table 3-1. Main Setup Menu Options
Option Description
System Time (HH/MM/SS) Sets the real-time clock for hour, minute, and seconds. The hour is calculated
according to a 24-hour military clock (i.e., 00:00:00 through 23:59:59). Use
TAB
to
move right;
SHIFT
+
TAB
to move left. The
ENTER
key may be used to move from
one field to the next. The numeric keys, 0-9, are used to change the field values.
It is not necessary to enter the seconds or type zeros in front of numbers.
System Date (MM:DD:YYYY) Sets the real-time clock for the month, day, and year. Use
TAB
to move right;
SHIFT
+
TAB
to move left. The
ENTER
key may be used to move from one field to
the next. The numeric keys, 0-9, are used to change the field values. It is not
necessary to type zeros in front of numbers.
Diskette A or B Selects the floppy disk drive installed in your system.