Xycom AHIP-370, Manual

Page: 32 / 65

AHIP-370 Manual
32
This menu allows you to change the peripheral control, advanced chipset
control, and disk access mode.
Table 3-4. Advanced Menu Option
Feature Description
I/O Device Configuration Allows entry into the I/O submenu.
Advanced Chipset Control Allows entry into the chipset submenu.
Installed O/S Select "Win95" if you are using an operating system with Plug & Play capabilities.
Default is [Other].
Reset Configuration Data Used to reset the Plug & Play configuration data table when new devices are
added/removed or whenever the BIOS is upgraded.
Large Disk Access Mode Select “DOS” if your system has DOS. Select “Other” if you have another operating
system, such as UNIX. A large disk is one that has more than 1024 cylinders, more
than 16 heads, or more than 63 tracks per sector.
Local Bus IDE Adapter Controls configuration of local bus IDE adapter. Default is [Both] (primary and secondary).
On-board Socket Site Allows entry into socket site submenu.
Flat Panel Allows entry into flat panel submenu.
I/O Device Configuration Submenu
Xycom BIOS Setup Utility
Advanced
I/O Device Configuration Item Specific Help
COM A: [Auto]
Base I/O Address [3F8] If the item you
Interrupt [IRQ4] are viewing has
specific help, it will
COM B: [Auto] be listed here.
Mode: [Normal]
Base I/O Address [2F8]
Interrupt [IRQ3]
Parallel port: [Auto]
Mode [Bi-directional]
Base I/O Address: [378]
Interrupt [IRQ7]
Floppy Disk Controller [Enabled]
Base I/O Address [Primary]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select » Submenu F10 Previous Values
Figure 3-5. Integrated Peripherals Submenu