Chapter Three – BIOS Setup Menus
39
Boot
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Boot
Item Specific Help
+Removable Devices
+Fixed Drives
If the item you
ATAPI CD-ROM Drive
are viewing has
Network Drive
specific help, it will
be listed here.
F1
Help
↑↓
Select Item
-/+
Change Values
F9
Setup Defaults
ESC
Exit
←→
Select Menu
Enter Select » Submenu
F10 Previous Values
Figure 3-12. Boot Menu
This menu allows you to specify the boot order for the unit. When you power the
unit up, it will attempt to boot off each of the listed devices, starting at the first de-
vice. To change this order, select items with the arrow keys and move them up or
down the list with the <+> (up) and <–> (down) keys. A moveable item may be a
single device or a group of devices.
The removable and fixed drives are device groups that may contain more than one
device. You can change the listed order of devices in a group with the <+> (up) and
<–> (down) keys, but the system will only attempt to boot off the first listed device
in a group before it continues through the boot order.
You can toggle between viewing or not viewing the devices in a group by selecting
the group and pressing <Enter>, and you can press <Ctrl Enter> to view all devices
in all groups. ATAPI removable devices, such as LS120 or Iomega IDE Zip® drives,
may appear under either the removable or fixed groups. You can move these devices
between the groups by selecting them and pressing the <n> key.
Note
Anytime the configuration data (see Figure 3-4 and Table 3-4) is reset,
the boot order resets to the default settings.
Summary of Contents for AHIP-370
Page 6: ...AHIP 370 Manual 6 Architecture Figure 1 1 AHIP 370 Block diagram...
Page 12: ......
Page 26: ......
Page 48: ......