Xycom 9465 PC/AT, Manual, Page: 46 / 87

Chapter 3 – Installation
3-31
It is the responsibility of the customer to ensure that the product is properly rated for the
location. If the intended location does not presently have a Class, Division, and Group
rating, then users should consult the appropriate authorities having jurisdiction in order
to determine the correct rating for that Hazardous Location.
In accordance with Federal, State/Provincial, and Local regulations, all hazardous loca-
tions’ installations should be inspected by the appropriate authority having jurisdiction
prior to use. Only technically qualified personnel should install, service, and inspect
these systems.
Warning
Suitable for use in Class I, Division 2 Groups A, B, C, and D, and Class
II, Division 2, Groups F and G hazardous locations or non-hazardous lo-
cations only.
Warning - Explosion Hazard
Substitution of components may impair suitability for Class I, Class II,
Division 2.
Advertissement Risque D’ Explosion
La substitution de composants peut rendre ce materiel inacceptable pour
les emplamements de classe I, II, Division 2.
Warning - Explosion Hazard
Do not disconnect equipment unless the power has been switched off or
the area is known to be non-hazardous.
Advertissement Risque D’ Explosion
Avant de deconnecter l’equipment, coupler le courant ou s’assurer que
l’emplacement est designe non dangereux.
Warning - Explosion Hazard
When in hazardous locations, turn off power before replacing or wiring
modules.
Advertissement Risque D’ Explosion
Dans les situations hasardees, couper la courant avant de remplacer ou
de cabler les modules.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com