Xycom 9465 PC/AT, Manual, Page: 19 / 87

9465/9465KPM System Manual
3-4
Feature Description
Display The 9465KPM comes with a 12.1-inch SVGA (800 x 600) STN or an optional
12.1-inch or 13.8-inch TFT flat panel. Impact-resistant shields protects the display
from breakage. If a touchscreen is factory installed, the touchscreen is backed by
heat-annealed safety glass replacing the impact-resistant shield.
System Status LEDs The 9465KPM features status LEDs on the front panel, which you can use to
monitor system operation.
Power
Lit when there is power to the 9465.
Disk Lit when the computer is accessing the disk drive.
COM Lit when there is communication activity on one of the serial ports, in-
cluding communication between the computer module and the touch-
screen (if on COM2) or a serial device.
Input Lit when the unit has a touchscreen; the LED gets brighter when a touch
input is detected or a key is pressed.
F/A key Lit when alpha characters are being returned.
During power-up, firmware on the processor board checks the hardware configu-
ration against the configuration stored in the CMOS memory.
Function and User-
Defined Keys The 40 relegendable function keys (80 using the F/A key) provide easy access to
familiar routines. (The F/A key can be used for alpha and symbol entry). See
the
Customizing Keypad Inserts
section in this chapter for details on customizing your
keypad inserts.
Numeric/Cursor
Control Keypad The data entry keypads are for entering data and moving the cursor.
F/A Key When the LED is lit, alpha characters are returned. You can use the F/A key to
adjust contrast on STN displays by holding it down while pressing a cursor
control keys.
PF10 Key (Keypad
Configuration) This key configures your keypad.
Keyboard Port (front
access) The 9465KPM supports one PS/2 keyboard, located on the lower left side of the
front panel behind the access door. When using this port, the side port cannot
be used.
Mouse The built-in pointing device is located on the right-hand side of the front panel. It
operates in the same manner as a conventional mouse. Refer to the mouse disk-
ette and manual supplied with your documentation kit. This mouse consists of
three basic parts:
Left mouse key
Serves the same function as the left button on a conventional
mouse.
Mouse dome Moves the pointer around the screen. Press the edge of the
dome that corresponds to the direction in which you wish to
move the pointer.
Right mouse key Serves the same function as the right button on a conven-
tional mouse.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com