XVision X100R User Manual Download Page 100

Page: 100 / 129

Figure 8-41 Abnormity -2

Parameter Function

Event
Type

The abnormal events include: no disk, no space, disk error, offline, IP

conflict.

You need to draw a circle to enable this function.

Threshold: It refers to the HDD free space.

Normal
Out

The corresponding alarm output channel when alarm occurs.

The alarm output channel may vary. The interface here is for reference
only.

Latch

The alarm output can delay for the specified time after alarm stops. The
value ranges from 10s to 300s.

Record
channel

After you selected the disk connection option, once the device is offline,
the activated channel can begin alarm record.

Record
latch

System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.

Send
email

If you enable this function, system can send out email to alarm the
specified user.

Show
message

Once you check the box to enable this function, system can display the
alarm icon on the right of the channel name at the local end.

8.3.3.3 Alarm I/O

Here you can search alarm output status. See Figure 8-42.

Summary of Contents for X100R


































































































































Search results

Summary of Contents for X100R

Reviews:

Related manuals for X100R

Brands by name

Popular brands

XVision X100R, User Manual

Search results

Summary of Contents for X100R

Reviews:

Related manuals for X100R

Brands by name

Popular brands