XVision X100R, User Manual

Page: 112 / 129

105

Device color or brightness setup is not correct.
6. Can not search local records.
There are following possibilities:

HDD ribbon is damaged.

HDD is broken.

Upgraded program is not compatible.

The recorded file has been overwritten.

Record function has been disabled.
7. Video is distorted when searching local records.
There are following possibilities:

Video quality setup is too low.

Program read error, bit data is too small. There is mosaic in the full screen. Please
restart the device to solve this problem.

HDD data ribbon error.

HDD malfunction.

Device hardware malfunctions.
8. There is no audio when monitor.
There are following possibilities:

It is not a power picker.

It is not a power acoustics.

Audio cable is damaged.

Device hardware malfunctions.
9. There is audio when monitor but there is no audio when system playback.
There are following possibilities:

Setup is not correct. Please enable audio function

Corresponding channel has no video input. Playback is not continuous when the screen
is blue.
10. Time display is not correct.
There are following possibilities:

Setup is not correct

Battery contact is not correct or voltage is too low.

Crystal is broken.
11. Device can not control PTZ.
There are following possibilities:

Front panel PTZ error

PTZ decoder setup, connection or installation is not correct.

Cable connection is not correct.

PTZ setup is not correct.

PTZ decoder and device protocol is not compatible.