XVision X100R User Manual Download Page 19

Page: 19 / 129

HDD Installation

For the first time install, please be aware that whether the HDDs have been installed.

Strongly recommended to use the HDDs which we suggest you to use (high speed HDD that

above 7200 rounds), we do not suggest you to use PC specified HDD.

You can refer to the

User

’s Manual

for recommended HDD brand. Please use HDD of 7200rpm or

higher. Usually we do not recommend the PC HDD.

Please follow the instructions below to install hard disk.

3.1

X100R/X400R

1. Loosen the screws of the

upper cover and side panel.

2. Fix four screws in the HDD

(Turn just three rounds).

Place the HDD in accordance with

the four holes in the bottom.

4. Turn the device upside down

and then turn the screws in

firmly.

in the chassis.

Fix the HDD firmly

6. Connect the HDD cable and

power cable.

7. Put the cover in accordance

with the clip and then place the

upper cover back.

8. Secure the screws in the

rear panel and the side panel.

Summary of Contents for X100R


































































































































Search results

Summary of Contents for X100R

Reviews:

Related manuals for X100R

Brands by name

Popular brands

XVision X100R, User Manual

Search results

Summary of Contents for X100R

Reviews:

Related manuals for X100R

Brands by name

Popular brands