XVision X100R User Manual Download Page 101

Page: 101 / 129

Figure 8-42 Alarm I/O Configuration

Important

The alarm output port should not be connected to high power load directly (It shall be less than 1A)

to avoid high current which may result in relay damage. Please use the co contactor to realize the

connection between the alarm output port and the load.

Please refer to the following sheet for detailed information.

Parameter

Function

Alarm output

The alarm output channel may vary. The interface here is for
reference only.

Please click the corresponding number and then click the trigger
button.

Trigger

Enable/disable alarm output.

Please note once you activate an alarm manually, you need to
click the output channel number again and then click trigger button
to disable it. Otherwise the alarm can not be cancelled.

Refresh

Search alarm output status.

8.3.3.4 Record

Record control interface is shown as in Figure 8-43.

Summary of Contents for X100R


































































































































Search results

Summary of Contents for X100R

Reviews:

Related manuals for X100R

Brands by name

Popular brands

XVision X100R, User Manual

Search results

Summary of Contents for X100R

Reviews:

Related manuals for X100R

Brands by name

Popular brands