X100 Series Quick Guide
33
INSTALL
&
CONNECT
SETUP
CONFIGURE
RECORDING
SOFTWARE
Connecting an RS485 Zoom, Pan Tilt Zoom or Speed Dome
The Video Server supports the following functions when connected to a compatible Zoom, Pan Tilt Zoom
or Speed Dome:
-
Pan Tilt Zoom,
-
Set Presets
-
Call Presets
-
Configure camera via On Screen Menu
The protocols supported are:
-
Pelco D
-
Pelco P
Resetting your camera
The Reset Button is used to restore the factory default settings. If you are experiencing problems
with the IP camera, sometimes restarting the device will make the system revert back to a normal state.
To reset, hold the button for at least 5 seconds. The camera will restore factory settings & reboot.
Note:
Restoring the factory default setting will lose all the previous settings including the IP address.
You will need to run the IPWizard II program to re-configure the camera to enable it to work properly again.
INSTALL
&
CONNECT
Summary of Contents for X100 Series
Page 1: ...Quick Guide X100 SERIES...
Page 44: ...V1 2 2010 10...
