XVision X100 Series, Quick Manual

Page: 10 / 44

10
X100 Series Quick Guide
INSTALL
&
CONNECT
SETUP
CONFIGURE
RECORDING
SOFTWARE
INSTALLATION
The X104P IP Camera can be mounted on a Wall or Ceiling using the L-Bracket provided. It is designed
for internal use only. It can also be desk mounted as supplied.
1.
For Wall or Ceiling mounting, make a hole where the camera is to be installed to insert the 12V DC
Power Adaptor and LAN cable.
2.
Feed the 12V DC Power Adaptor and LAN cables through the hole.
3.
Use the screws and wall plugs supplied to fix the bracket to the camera, then to the ceiling as
shown. For wall mounting, fix the bracket to the wall before mounting the camera to the bracket.
4.
Connect the 12V DC Power Adaptor and LAN cable to camera.
5.
The camera is now ready for you to setup and configure using your PC.
- See SETUP on page 34.
Lens Adjustment
Make any lens (focus) adjustments after you have
connected the camera and have setup live viewing via
your PC.
To adjust the lens, open the Dome Cover by turning it
anti-clockwise and rotate the Focus Ring.
For Wireless Connection
Attach the Wireless Antenna to the camera. Configure your camera’s IP settings using a Wired
connection before you start.
- See SETUP on page 34.
For Audio
Connect the 3.5mm microphone Audio Out Socket to an audio output device such as a speaker with an
amplifier for voice alerting or for enabling the 2 Way Audio function.
CEILING MOUNT
Power &
LAN cable
Power &
LAN cable
WALL MOUNT
INSTALL
&
CONNECT
Focus Ring