18
X100 Series Quick Guide
INSTALL
&
CONNECT
SETUP
CONFIGURE
RECORDING
SOFTWARE
7.
Adjust the camera direction and angle of view as required using the camera bracket inside.
- Make any lens (Zoom/Focus) adjustments after you have connected the camera & have setup live viewing via your PC.
- Make the Zoom Adjustment by rotating the screw anticlockwise for NEAR adjustment and clockwise for FAR
adjustment until you get the desired view. Next make the Focal Adjustment by rotating the screw anti-clockwise
for TELE adjustment and Clockwise for WIDE adjustment until you get the desired view.
- After adjustment, tighten both screws to set the Zoom and Focus Rings.
INSTALL
&
CONNECT
Camera bracket
CAMERA DIRECTION ADJUSTMENT
For Horizontal
Adjustment
Camera’s
Tilt bracket
For Vertical
Angle
Adjustment
Camera’s
Board hinge
For Horizontal
(Left/Right) Board
Adjustment
Zoom
Adjustment
Screw
Zoom and
Focus Rings
Focus
Adjustment
Screw
NEAR ~ FAR
WIDE ~ TELE
LENS ADJUSTMENT
Summary of Contents for X100 Series
Page 1: ...Quick Guide X100 SERIES...
Page 44: ...V1 2 2010 10...
