22
X100 Series Quick Guide
INSTALL
&
CONNECT
SETUP
CONFIGURE
RECORDING
SOFTWARE
INSTALLATION
1.
Select a mounting position and make a hole where the camera is to be installed
2.
Use the screws and wall plugs supplied to fix the bracket on a wall or ceiling as shown.
3.
Feed the trailing lead with connections through the hole.
4.
Adjust the camera direction and angle of view as required using the bracket.
5.
Connect the LAN cable and 12V DC Power Adaptor to camera (
if using Power over Ethernet,
12V DC Power Adaptor is not required
).
6.
The camera is now ready for you to setup and configure your camera using your PC.
- See SETUP on page 34.
For Audio
Connect the 3.5mm microphone Audio In Socket to an external Microphone for audio monitoring.
Connect the 3.5mm microphone Audio Out Socket to an audio output device such as a speaker with an
amplifier for voice alerting or for enabling the 2 Way Audio function.
Feed trailing
lead through
wall
WALL MOUNT
CEILING MOUNT
Feed trailing
lead through
ceiling
Slide
forward
sun/rain
shield to fix
bracket to
camera
INSTALL
&
CONNECT
Summary of Contents for X100 Series
Page 1: ...Quick Guide X100 SERIES...
Page 44: ...V1 2 2010 10...
