Xtreme X90-2S, User & Installation Manual

Page: 74 / 88

Fault! <41>Over temp Over temperature
Fault! <42>DSP commu fail DSP communication failed
Fault! <43>Overload Heavy overload causes UPS to fault
Fault! <45>Charger error As stated
Fault! <46>Incorrect UPS set Incorrect UPS setting
Fault! <47>DSP&MCU commu fail MCU communication failed
Fault! <49>In&out phase incomp Input and output phase error
Fault! <61>BYP SCR SC Bypass SCR short circuited
Fault! <62>BYP SCR open Bypass SCR open
Fault! <63>INV R wave abnormal Voltage waveform abnormal in R phase
Fault! <64>INV S wave abnormal Voltage waveform abnormal in S phase
Fault! <65>INV T wave abnormal Voltage waveform abnormal in T phase
Fault! <66>CT saturation As stated
Fault! <67>BYP out SC Bypass output short circuited
Fault! <68>BYP out line SC Bypass output line to line short circuited
Fault! <69>INV SCR SC Inverter Relay short circuited
Fault! <6C>Bus-VOL dec fast BUS voltage drops too fast
Fault! <6D>CUR detect err Current sampling value error
Fault! <6E>SPS Power fault SPS Power fault
Fault! <6F>BATT reversal Battery polarity reversed
Fault! <71>R PFC IGBT fault PFC IGBT over-current in R phase
Fault! <72>S PFC IGBT fault PFC IGBT over-current in S phase
Fault! <73>T PFC IGBT fault PFC IGBT over-current in T phase
Fault! <74>R INV IGBT fault INV IGBT over-current in R phase
Fault! <75>S INV IGBT fault INV IGBT over-current in S phase
Fault! <76>T INV IGBT fault INV IGBT over-current in T phase
Fault! <77> ISO Over temp Isolation transformer over temperature
Fault! <79> Power Module Connect Fail As stated
Warning! <01> BATT open
Battery not connected
Warning! <02> IP N loss Input Neutral loss
Warning! <03> IP site fail Input site failed
Warning! <04> Line phase error As stated
Warning! <05> Bypass phase error As stated
Warning! <06> Bypass FRE unstable Bypass frequency unstable
Warning! <07> BATT over charge Battery over charge
Warning! <08> BATT low Battery voltage is too low.
Warning! <09> Overload warning As stated
Warning! <0A> Fan lock warning As stated
Warning! <0B> EPO active As stated
Warning! <0D> Over temperature As stated
Warning! <10> L1 IP fuse fail L1 Input fuse failed
Warning! <11> L2 IP fuse fail L2 Input fuse failed
Warning! <12> L3 IP fuse fail L3 Input fuse failed
Warning! <21> Line connect dif Line connect different
Warning! <22> Bypass connect dif Bypass connect different
Warning! <24> Par INV vol dif Parallel output voltage setting different
Warning! <33> Lock BYP OL 3 times Locked in bypass after overload 3 times in 30 min