GPX Pro
23
© 2009 XT Racing
Data acquisition setup and parameters
For detailed information, see the section
Data Acquisition (DAQ
)
Tachometer options
– controls how the tach lights and tach bar during races will be utilized
Tach style
– how the 8 LEDS will be utilized
Off
– lights will not be used for anything
1 LED at a time
– only one LED lights up at a time
All LEDs
– more LEDs light up at increasing RPMs (consumes more battery power!)
Thumbs up/down
– lights are not used for RPM. In Circuit racing, if you do a faster
lap than the previous, the green lights will blink; if a slower lap, the red lights will
blink.
Tach brightness
– a setting from 1-10 of increasing brightness of the tach lights
Tach RPM Green
– the minimum RPM that the green LEDs come on
Tach Yellow
– the RPM at which the yellow LEDs start coming on
Tach Red
– The RPM at which the red LEDS start coming on
Tach RPM white (shift light)
– the “redline”
Shift light style
- what happens when you exceed the "redline"
White LEDs blink
White LEDs solid
All LEDs blink
Tach Display Minimum RPM
– this is the minimum RPM on the Tach that displays on the
LCD graph
Tach Display Maximum RPM
– this is the maximum RPM on the Tach that displays on the
LCD graph
LCD Display Options
Backlight on/off control
– control over the LCD panel backlight
Off
– no backlight
On Activity
– turns on for about 10 seconds after every keypress, and lap or split
Summary of Contents for GPX Pro
Page 1: ...User Manual 11 11 2010...
Page 95: ...XTStudio 91 2009 XT Racing...