GPX Pro
43
© 2009 XT Racing
You can specify what text you want displayed:
In addition, you can specify the
polarity
of the text:
Normal
polarity means the first text item is displayed for a
low
voltage, and the second item
for a
high
voltage.
Reverse
polarity means the first text item is displayed for a
high
voltage, and the second item
for a
low
voltage.
A switch input can have an alarm associated with it. See the section on Alarms.
1.7.4
Generic Types of Inputs
If you select Custom as the type of DAQ input, you have a choice from the following menu:
1.7.4.1
0-100%
A 0-100% input is an input which gets calibrated at 0% (its minimum value) and 100% (its
maximum value). This is similar to throttle position. See that section for more information.
1.7.4.2
Zero-based
A zero-based input is a generic input which has a base value (0 point). Only that point gets
calibrated.
The value displayed and used in GPStudio will be an arbitrary number above or below this 0-
point, depending on whether the voltage is higher or lower than the calibration point.
Summary of Contents for GPX Pro
Page 1: ...User Manual 11 11 2010...
Page 95: ...XTStudio 91 2009 XT Racing...
