User Manual
XProHeli DYS 3XBrushless Gimbal
DYS 3X Brushless Gimbal For GoPro
Page 27
©2014 XPROHELI. All Rights Reserved.
SPEED MODE – The RC transmitter will control the
rotation speed. If the stick is centered, the camera
stands still. If the stick is deflected, the camera starts to
rotate but does not exceed the min-max range
specified. Speed is slightly decreased near the minmax
borders to yield steady accelerations. The speed of
rotation is proportional to stick angle and the SPEED
setting. RC control inversion is allowed in both control
modes.
MIN.ANGLE, MAX.ANGLE – Sets the range of angles
controlled from an RC transmitter or in Follow Mode. To
reverse the control, set the higher value first and lower
value second. For example, if you want to configure a
camera to go from leveled position to down position,
set 0-90 (or 90-0 to reverse movement).
LPF – Sets control signal filtering. The higher the value,
the smoother the reaction to stick commands. This filter
avoids fast stick movements but add commands. This
filter avoids fast stick movements but adds some
reaction delay to stick movement.DYS 3XSOFTWARE
