User Manual
XProHeli DYS 3XBrushless Gimbal
DYS 3X Brushless Gimbal For GoPro
Page 17
©2014 XPROHELI. All Rights Reserved.
2.
Profile – Select, rename, load, and save different profiles.
The DYS 3X Profiles are configured as follows:
a.
Profile 1 – Follow Mode (Pan only)
b.
Profile 2 – Follow Mode (Pan + Pitch)
c.
Profile 3 – Unused (3 clicks set manual tilt angles
defined in service tab)
d.
Profile 4 – Lock Mode (follow modes off)
Note: to switch modes on the DYS 3X while connected
to the GUI simply select Profile 1,2 or 4 and click write.
3. Configuration – Central part of the window, organized into
seven tabs:
i. Basic Tab – Basic gimbal stabilization settings. Do not
change these settings unless you are familiar with their
functions. See performance tuning section for more
details.
ii. Advanced Tab – More precise tuning options – for
fine tuning you should not need to adjust any of these
parameters.
iii. RC Settings – Settings to control the gimbal
roll/pitch/yaw orientation with RC inputs.
iv. Service – Specify the behavior of the MENU button
(located on the bottom of the control box) and tune
the battery monitoring service.
v. Follow Mode – Settings related to this special mode
of camera control.
vi. Realtime Data – Realtime sensor data monitoring.
This screen is helpful in tuning your gimbal performance.
vii. Firmware Upgrade – Firmware and SimpleBGC GUI
software versions and update options.
Upgrade
firmware at your own risk!
4. Control Panel – Graphic visualization of gimbal orientation
angles for all three axes.
• Black arrows display the angles.
