User Manual
XProHeli DYS 3XBrushless Gimbal
DYS 3X Brushless Gimbal For GoPro
Page 26
©2014 XPROHELI. All Rights Reserved.
RC Settings in GUI
i. ROLL, PITCH, YAW – Controls the position of the
camera.
ii. CMD – Allows you to execute specified actions.
Configure your 2- or 3-position switch on your RC
transmitter for a specified channel and assign it to the
CMD channel. Its range is split into 3 sections : LOW,
MID, HIGH. When changing the position of your RC
transmitter switch, the signal jumps from one section to
another, and the assigned command is executed.
iii. FC_ROLL, FC_PITCH – Used to mark any PWM input to
be a signal from the external flight controller. (This is an
advanced feature that we do not recommend)
RC MIX – You can mix 2 inputs together before
applying them to the ROLL, PITCH or YAW axis. This
feature enables you to control the camera from two
sources, a joystick and RC transmitter, for example. You
can adjust the proportion of the mix from 0 to 100%.
ANGLE MODE – The RC transmitter will control the
camera angle directly. The full RC range will move the
camera from min to max angles, as specified above. If
the RC transmitter stick does not move, the camera
stands still. The speed of rotation depends on the
“SPEED” and acceleration limiter settings.
