User Manual
XProHeli DYS 3XBrushless Gimbal
DYS 3X Brushless Gimbal For GoPro
Page 15
©2014 XPROHELI. All Rights Reserved.
Caution: It is safe to connect both USB and the battery
simultaneously, but be very careful not to reverse
the polarity of the battery, because it will burn out the
controller and may damage your PC!
Download the SimpleBGC GUI & User Manual
SimpleBGC GUI 2_40b8.zip
SimpleBGC 32bit 2_40b8 GUI User Manual
The SimpleBGC GUI software application enables you to do
the following:
Update the firmware
Make changes to the settings of your controller
Tune settings for optimal performance
Adjust settings for various modes of operation
USING SimpleBGC GUI
After you start the software and select the correct COM port
from the list, click “Connect." When the connection is
established, all board settings and profiles will be loaded into
the software. You can re-load the current board parameters
anytime by clicking the “READ” button.
After adjusting parameters in the software, you should write
them to the controller board by clicking the “WRITE” button.
Only the current profile parameters will be saved to the
board. To return to the default settings, select the “USE
DEFAULTS” button.
To choose a different profile, select it from the list of profiles
located in the upper right corner of the window. You can
store different settings as five different profiles onto the
controller board. You can switch profiles saved on the board
by choosing the profile in the
software or by pressing the MENU button, if configured on
your controller board.