XP PLS600 Series, Programming Manual

Page: 29 / 33

29
STATus:OPERation:CONDition?
This command returns the present contents of the Operation Status Condition Register. If multiple bits are set, the result is the
sum of the set bit values.
1 Calibrating (not used)
2 Setting (not used)
4 Ranging (not used)
8 Sweeping (not used)
16 Measuring
32 Waiting for Trigger (not used)
64 Waiting for Armed (not used)
128 Correcting (not used)
256 Output Activated
512 Constant Voltage mode
1024 Constant Current mode
2048 Constant Power mode
4096 Not used
8192 Instrument Summary Bit (not used)
16384 Program running (not used)
STATus:OPERation:ENABle <value>
This command sets the Operation Status Enable Register to the specified value. The value is specified in decimal form described
in the description of “STATus:OPERation:CONDition?”. A value 0 clears all Enables.
STATus:OPERation:ENABle?
This command returns the Operation Status Enable Register contents. The returned value is in decimal form described in the
description of “STATus:OPERation:CONDition?”. If multiple bits are set, the result is the sum of the set bit values.
STATus:OPERation[:EVENt]?
This command returns the Operation Status Event Register contents. The returned value is in decimal form described in the
description of “STATus:OPERation:CONDition?”. If multiple bits are set, the result is the sum of the set bit values.
STATus:PRESet
Set the Enable Registers for Operation Status, Questionable Status, Temperature Status, and Hardware Status to their default
values. (Default value of all four Enable Registers is zero.)
STATus:QUEStionable:CONDition?
This command returns the present contents of the Questionable Status Condition Register. If multiple bits are set, the result is
the sum of the set bit values.
1 Over-Voltage Error
2 Over-Current Error
4 Summary of Time (not used)
8 Over-Power Error
16 Summary of Temperature
32 Summary of Frequency (not used)
64 Summary of Phase (not used)
128 Summary of Modulation (not used)
256 Not Calibrated
512 Summary of Hardware
1024 Watchdog Error
2048 Self-Test Error
4096 Output Error
8192 Instrument Summary Bit (not used)
16384 Command Warning (not used)