62
time couldn’t be longer than “Ring Timeout”.
Hold Access:
specify hold permission for the station.
Open:
any station can place this trunk on hold and any other station is allowed to take it back
off of hold.
Private:
only the station that placed the trunk on hold is allowed to take it back off of
hold.
Time Conditions
On Time Condition page, you can create time groups. A time group is a list of times against which
incoming or outgoing calls are checked. The rules specify a time range, by the time, day of the week,
day of the month, and month of the year. Time conditions can be assigned to an inbound route, which
control the destination of a call based on the time. Time conditions can also be assigned to an
outbound route in order to limit the use of that route.
Add Time Condition
Go to
Settings
>
PBX
>
Call Control
>
Time Conditions
, click
to add time condition.
Figure 6-8 Add Time Condition
Name
: give this Time Condition a brief name to help you identify it.
Time
: this is where you will define a time range. You can define multiple ranges in the same time
group by clicking
.
Summary of Contents for XonTel XT- 60 PBX
