19
Figure 3-1 Routing Table
Static Routes
Click Static Routes tab, you can add static routes here.
Click
to add a static route.
Click
to edit the static route.
Click
to delete the static route.
Check the Static route settings below.
Static Route
Destination
Enter the destination IP address or IP subnet for the XonTel
XT-60/XT-120 to reach using the static route.
Example:
IP address:
192.168.6.120
IP subnet:
192.168.6.0
Subnet Mask
Enter the subnet mask for the destination address.
Example:
255.255.255.255
Gateway
Enter the gateway address. The XonTel system will reach the
destination address via this gateway.
Example:
192.168.6.1
Metric
The cost of a route is calculated using what are called routing
metric. Routing metrics are assigned to routes by routing
protocols to provide measurable values that can be used to
judge how useful (how cost) a route will be.
Interface
Select the network interface. The system will reach the
destination address using the static route through the selected
network interface.
Table 3-4 Static Routes Settings Description
Summary of Contents for XonTel XT- 60 PBX
