29
NTP Server: enter a NTP server.
Set Up Manually
: if you choose this mode, you need to set the time manually.
Date: choose the date.
Time: choose the time.
Set the system’s email to send voicemail to email, alert event emails, fax to email, email to SMS and
SMS to email. Go to
Settings > System > Email
to configure the system email.
Check the email settings parameters below.
Option
Description
Email Address
Enter the email address.
Password
Enter the password.
Outgoing Mail Server (SMTP)
Enter SMTP server and port.
Example
:
smtp.sina.com:25
Incoming Mail Server (POP3)
Enter the POP3 server and port.
Example
:
pop.sina.com:110
Enable TLS
Use TLS to send secure message to server .If the email
sending server needs to authenticate the sender, you
need to select the checkbox.
Note: if you use Gmail or Exchange, you need enable
this option.
Table 3-8 Email Settings
After finishing the configuration, click
to test the email. In the prompt, fill in an email address
to send a test email to verify the Email settings.
Storage
XonTel XT-60/XT-120 provides local storage (Flash) and supports external storage TF/SD card.
Users could choose where to store the voicemails, CDR, recordings and logs.
Storage Devices
Go to
Settings > System > Storage
to configure the storage. All the local storage and external
storage status shows on the page.
Summary of Contents for XonTel XT- 60 PBX
