XONTEL S2400 User Manual Download

Page: 99 / 104

S2400 User Manual

System Maintenance

This chapter describes system maintenance settings including the followings:
□

Firmware Upgrade

□

Backup and Restore

□

Reset and Reboot

□

System Logs

□

Packet Tool

Firmware Upgrade

S2400 provides automatic updates, new firmware file will be checked via a cloud

server. In addition, firmware upgrade can be done via HTTP and TFTP manually on

S2400. Please go to

System→ System Preferences→ Firmware Update

to do

upgrade.

Note:

1. If

―Reset configuration to Factory Defaults‖ is enabled, the system will restore to

factory default settings.

2. When update the firmware, please

don’t turn off the power. Or the system will get

damaged.

3. If you are trying to upgrade through HTTP, please make sure that your S2400 is

able to visit external network, or it cannot access XonTel website to get the

firmware file, causing the upgrade fail.

Automatic Updates

Figure 20-1 Automatic Updates

Summary of Contents for S2400









































































































Search results

Summary of Contents for S2400

Reviews:

Related manuals for S2400

Brands by name

Popular brands

XONTEL S2400, User Manual

Search results

Summary of Contents for S2400

Reviews:

Related manuals for S2400

Brands by name

Popular brands