S2400 User Manual
Auto Recording
This chapter explains how to configure auto recording on S2400 and how to manage
the recording files.
□
Auto Recording Settings
□
SD Card Management
□
Store Recordings to Network Disk
□
Share Recordings
Auto Recording Settings
S2400 supports auto recording for an established call. Go to
System→ Auto
Recording Settings→ Recording Settings
to configure auto recording settings.
Note:
before enabling call recording, please make sure that the SD card or the Net
Disk performs well.
Table 16-1 Auto Recording Configurations
General Preferences
Enable Call Recording
Enable or Disable Auto Recording feature.
You can choose:
Record Inbound calls
Record Outbound calls
Record Internal calls
Storage Location
After enabling Call recording, you can choose where to
store the recordings, in the Network Disk or in the SD
card.
Status: shows if the SD card or Network Disk is
successfully mounted to S2400.
Record Inbound Prompt
If Call Recording is enabled, the caller will hear the
preconfigured prompt when the inbound calls go through
trunks.
Written to the Recording file:
If enabled, the prompt will be recorded.
Record Outbound Prompt
If Call Recording is enabled, the callee will hear the
preconfigured prompt when the outbound calls go through
trunks.
Written to the Recording file:
If enabled, the prompt will be recorded.
Apply To
Record Trunks
When ticked, all calls through the selected trunks will be
Summary of Contents for S2400
Page 1: ......
Page 37: ...S2400 User Manual Figure 6 11 Timer Settings ...
