Technical Support US: 888-443-2751
Technical Support INTL: 316-943-2751
31
OVEN SERVICE PROCEDURES
Conveyor Speed Settings
Read the entire instruction before programming.
TIP
Min Time
Factory default is 90. To change, press ENTER. Use Up/Down arrows to change time
which is shown in seconds. Press ENTER to accept and advance.
Max Time
Factory default is 1200. To change, press ENTER. For 1832 use 1020 and all other
models will be 1200. Use Up/Down arrows to change time which is shown in seconds.
Press ENTER to accept and advance.
Sprocket Diameter
Factory default is 1.77. To change, press ENTER. Use Up/Down arrows to change di-
ameter. Press ENTER to accept and advance.
Final Gear Ratio
Factory default is 300. To change, press ENTER. Use Up/Down arrows to change gear
ratio. Press ENTER to accept and advance.
Trim Speed
Factory default is 100. To change, press ENTER. Use Up/Down arrows to change trim
speed. Press ENTER to accept and advance.
To enter conveyor settings press and hold three (3) buttons (HIDDEN, UP, and DOWN) for ten
(10) seconds to enter. Displays will auto-exit programming screens after five (5) seconds of no ac-
tivity.
ENTER
Used to select and save parameters.
HIDDEN
Behind the XLT is a hidden button. This
is used along with the up and down button
to access the programming mode.
UP
Increases the setting of the selected pa-
rameter.
DOWN
Decrease the setting of the selected pa-
rameter.
