XLifter model X1, user guide, ver. 1.41, firmware ver. 0.98
Reco, spol. s.r.o., Na hlinach 6, 18200 Prague, Czech Rep., https//www.xlifter.com, [email protected]
Page 1
Table of contents:
1.
Legal disclaimer
2
2.
General description
2
3.
Safety information
3
4.
Installation
4
4.1.
Package Contents
4
4.2.
Installation - general description and overview
4
4.3.
EAS Unit Installation
5
4.4.
Control Module Installation
8
4.5.
Vehicle type and calibration settings
9
4.6.
Dismantling XLifter from vehicle
9
5.
Instruction for use
10
5.1.
Function Lifter:
Height adjustment in predefined programs.
10
5.2.
Function Lifter – free
: Adjustment from -40 to +75 mm in 5 mm steps.
11
5.3.
Function levelling
: self-level the vehicle.
12
5.4.
Menu “Settings”
: User settings.
14
6.
Calibration
15
7.
Service menu
16
7.1.
Entering the Service menu
16
7.2.
Service menu items description
17
8.
Firmware update
18
9.
Technical specifications
20
10.
FAQ & Troubleshooting
21
11.
Warranty conditions
23
12.
Contacts and support
23
Quick orientation in this manual:
Congratulations, you are actually reading the manual! I'm so glad you decided to read the
instructions to your new XLifter. Many users casually dismiss instructions and seek to
figure it out on their own – which is perfectly possible, we all do! But, even then I’ve built
the product as simple and intuitive as possible, there are some useful tricks, hints,
warnings and “behind the scenes” info, which I’ve collected over the years for you into this
manual. It’s worth to read it. Dig in, mark it up, cut out your favourite sections. It's going to
be a wild ride.
Chapter 4 is all about installation, skip it if the XLifter is already installed.
The most
important is the chapter 5
-
Instruction for use
, where the XLifter daily-use functions are
described. Please consider reading it again after a few days of hands-on experience.
