XLifter model X1, user guide, ver. 1.41, firmware ver. 0.98
Reco, spol. s.r.o., Na hlinach 6, 18200 Prague, Czech Rep., https//www.xlifter.com, [email protected]
Page 16
7.
Service menu
The XLifter is designed for maximum ease of use. Therefore, the
configuration or
technical functions are hidden in the "Service menu"
. The Service menu is not needed
during normal operation. A special procedure is required to call it up.
Scrolling through items in the Service menu is identical to other menus - use the
buttons to choose an item, the
button to activate it and the
button to step back.
7.1.
Entering the Service menu
The
Service menu is displayed by holding down any of control module buttons when
the module powers up
. That means to press and hold down any button when the control
module is off, then turning the car ignition on, and
then
releasing the button (when the
service menu is displayed)
Option 1
– disconnect the control module 12V power connector (
all vehicles
)
a)
Unplug the control module power plug from the cigarette lighter socket (the
display will turn off).
b)
Press and hold down any button
, then re-insert the power plug into the
cigarette lighter socket. The control module will display the Service menu.
Option 2
– cycle the ignition (
Discovery 3
)
a)
Switch the ignition off by turning the ignition key into position 0. The control
module display will turn off.
b)
Press and hold down any button
, then turn the ignition on (key into
position II). The control module will display the Service menu.
Option 3
– cycle the ignition (
Discovery 4
)
●
Use especially if the control module power is “hardwired” to the vehicle 12V power.
a)
Switch off the engine by pressing “START ENGINE STOP“ button.
b)
Stay inside the car and
lock it by
pressing the closed lock symbol on your
smart
key.
The vehicle powers down the ignition-switched power rail (that includes
cigarette lighter socket) and control module display will turn off.
c)
Press and hold down any button
, then unlock your car with your smart
key, then turn the ignition on by pressing the “START ENGINE STOP“ button. The
cigarette lighter socket powers up and the control module will display the Service
menu.
Quitting the Service menu:
The Service menu can be quit any time by pressing
. The XLifter will restart into a
standard mode.
