XLifter model X1, user guide, ver. 1.41, firmware ver. 0.98
Reco, spol. s.r.o., Na hlinach 6, 18200 Prague, Czech Rep., https//www.xlifter.com, [email protected]
Page 17
7.2.
Service menu items description
1.
Keylock
●
Activation/deactivation of the key lock. Locked keys can only be
unlocked with this Service menu item.
2.
Pair EAS unit
●
Wireless pairing of the control module and the XLifter EAS unit.
●
The control module and the XLifter EAS unit are paired before shipping. Use this
function when you need to pair new unit due to replacement.
●
After activation, the control module scans available Bluetooth devices and offers
them for pairing. The name of the XLifter EAS unit is "X LIFTER EAS". Do not pair the
control module to any other devices.
3.
Car type
●
Setting of correct type of height sensors according to a vehicle
type.
●
Set according to your specific vehicle – Discovery 3 (D3),
Discovery 4 (D4), Range Rover Sport (RRS).
Notice – for D3 year 2008 and newer set as D4!
●
After setting the car type, you’ll be required to run calibration again.
4.
Steering position
●
The XLifter EAS unit mounting position depends on steering
wheel side and the tilt sensor behaviour must be adjusted.
●
Set accordingly to your vehicle.
5.
Firmware
5.1.
SW Version
●
Shows the firmware version of the control module and the
XLifter EAS unit.
●
If the display shows “WAIT” instead of the EAS firmware
version, wait for a couple of seconds until EAS unit is connected and retry the
function again.
5.2.
Controller update
●
Firmware update of the control module. See firmware update instructions.
5.3.
The EAS unit update
●
Firmware update of the EAS unit.
5.4.
Serial numbers
●
Shows the serial numbers of the both EAS unit and control module.
6.
Clear calibration
●
Deletes the XLifter calibration. Xlifter will display “!NOT! CALIBRATED” and will need
to be calibrated again.
●
Useful when moving XLifter to another vehicle or selling it. Please don’t let new user
use the Xlifter with wrong calibration!
7.
Debug
(ON/OFF)
●
Displays the voltage values on each wheel height sensors instead of the shock
absorbers infographics plus additional diagnostic information.
●
Default setting is OFF, no need to switch on.
